Chevelle and Nova Rear Axle Pinion Flange Driveshaft U Joint Straps and Bolts
New correct design strap style mounts required to install your drive shaft U joint at the rear end axle. Because so many rear ends have been changed, rebuilt or altered, please make sure this is the version you need. The design goes over your rear end U joint and you put a bolt into the yoke for moutning. Includes; 2 U straps and four bolts.
* Fits yokes like pictured below without any gap for nuts:
Yoke is not included only pictured for reference.
** Note ~ This info is common but not always correct, again please double check your particular car. Over the years many cars have had a rear end swap.
67-69 10 bolt 8.2 rears used U bolt style
70-81 10 bolt 8.5 rears used strap style
67-68 12 bolt 8.75 rears used U bolt style
69-70 12 bolt 8.75 rears used strap style
PART NUMBER: TRA-778
New correct design strap style mounts required to install your drive shaft U joint at the rear end axle. Because so many rear ends have been changed, rebuilt or altered, please make sure this is the version you need. The design goes over your rear end U joint and you put a bolt into the yoke for moutning. Includes; 2 U straps and four bolts.
* Fits yokes like pictured below without any gap for nuts:
Yoke is not included only pictured for reference.** Note ~ This info is common but not always correct, again please double check your particular car. Over the years many cars have had a rear end swap.
67-69 10 bolt 8.2 rears used U bolt style
70-81 10 bolt 8.5 rears used strap style
67-68 12 bolt 8.75 rears used U bolt style
69-70 12 bolt 8.75 rears used strap style
PART NUMBER: TRA-778