1964 - 1972 Chevelle 4 Wheel Power Disc Brake Conversion Kit, Red Calipers with Drilled and Slotted RotorsThis is a complete front and rear Four Wheel Disc Brake Conversion Kit with Red Calipers, Drilled and Slotted Rotors, and a 11" Delco Stamped Booster.
- Stock Height spindles
- Front Vented 11" rotors 5"x4.75" w/ 7/16" studs
- Dust caps
- Inner & outer bearings, seals, & mounting hardware
- Front caliper brackets
- Backing Plates
- Front rubber brake hoses
- Large GM single piston RED POWDER COATED calipers pre-loaded with pads
- GM A, F, X 11" Single Delco Moraine O.E.M. Stamped Power Brake Booster Conversion Kit (Disc/ Disc)
- 11" Delco Moraine Stamped Zinc Power Brake Booster O.E.M.
- Firewall Brackets Riveted on Not Bolt On
- 1-1/8"" Bore Cast Iron Master Cylinder
- Left Mount Proportioning Valve Kit (2) 3/8"-24 For Front Brakes & (1) 9/16"-18 For Rear Brakes
- Brass Proportioning Valve for Disc/Disc Brakes
- Mounting Bracket
- Bake Light warning switch
Must use 15" or larger rims.
- Complete Rear Disc Brake Conversion Kit Includes:
- Rear 11" Vented GM Rotors Multi Pattern
- Fits 5x4.75" w/ 7/16 Studs & 5x4.5" w/ 1/2 Studs
- Large GM Large Bore Single Piston RED POWDER COATED Calipers w/ Self Adjusting E-Brake (1979 Cadillac El Dorado)
- D54 Pads Included
- Caliper Brackets & Spacers
- Bracket Hardware
- Rubber Brake Hoses Hoses & Clips
- Emergency Brake Cables
Maximum diameter of 6.11" to fit rotor hat. .050x45 Degree Chamfer 2.786" max register axle. Does not Fit 14" Rims Must use 15" or larger. When installing rear disc brake kit a disc/disc proportioning valve the 1-1/8" bore master cylinder is included.
**DOES NOT INCLUDE BRAKE LINES** WILL ONLY WORK WITH 15 INCH OR LARGER WHEELS
PART NUMBER: BRC-4110R
