1964 - 1972 Chevelle 4 Wheel Manual Disc Brake Conversion Kit, Non-PowerThis is a complete front and rear Four Wheel Disc Brake Conversion Kit with Cast Finish Calipers and Stock Rotors.
- Stock Height spindles
- Front Stock Plain Face 11" rotors 5"x4.75" w/ 7/16" studs
- Dust caps
- Inner & outer bearings, seals, & mounting hardware
- Front caliper brackets
- Backing Plates
- Front rubber brake hoses
- Large GM single piston calipers pre-loaded with pads
Must use 15" or larger rims.
- Complete Rear Disc Brake Conversion Kit Includes:
- Rear 11" Plain Face GM Rotors Multi Pattern
- Fits 5x4.75" w/ 7/16 Studs & 5x4.5" w/ 1/2 Studs
- Large GM Large Bore Single Piston Calipers w/ Self Adjusting E-Brake (1979 Cadillac El Dorado)
- D54 Pads Included
- Caliper Brackets & Spacers
- Bracket Hardware
- Rubber Brake Hoses Hoses & Clips
- Emergency Brake Cables
This kit does NOT come with a Master Cylinder or a Proportioning Valve. It is designed to be used with several of our Master Cylinders or Disc/Disc Upper Firewall Booster Kits.
Maximum diameter of 6.11" to fit rotor hat. .050x45 Degree Chamfer 2.786" max register axle. Does not Fit 14" Rims Must use 15" or larger.
When installing rear disc brake kit a disc/disc proportioning valve with a 1-1/8" bore master cylinder is recommended, not included. This kit can be used with several of our Disc/Disc upper booster kits for a custom set-up.
**DOES NOT INCLUDE BRAKE LINES** WILL ONLY WORK WITH 15 INCH OR LARGER WHEELS
PART NUMBER: BRC-4111
