RFID Push Button Start System for Vehicles with Power Door Locks and Accessories, PBS-II

Get the latest technology for your classic Chevelle or Nova with this new push button start system.

The Digital Guard Dawg PBS-II Push Button Start system expands your possibilities with 5 programmable output channels to remotely control power locks, shaved doors, power windows and remote trunk release all from a single iTag transmitter. Using advanced RFID technology (Radio Frequency Identification) just like that on found on the world’s finest luxury vehicles, the PBS-II completely eliminates your vehicles ignition key switch and provides proximity controlled automatic operation of your entire Ignition. Simply carry one of the systems digital RFID “iTags” with you. As you come into proximity of your vehicle, the PBS-II verifies your identity, authorizes your ignition and with just the “Push of a Button” your engine roars to life! When you arrive at your destination, another push turns your engine off and you just walk away. 5 remote operated output channels put complete control of all your power accessories right at your fingertips. If you’re building something special and needing one unit that can do it all, the PBS-II is just what you’re looking for!

FITMENT: Pre 1998 vehicles with power accessories.

Must Choose Start Button Color and Button Size (22mm or 25mm Hole Size)

Employing the latest technologies and innovations, we design and manufacture keyless ignition systems for cars. Not only do our systems protect, but they provide the ultimate in customer convenience and excitement!

PBS-II Push Button Start System Installation Instructions (PDF)

Part Number: ENC-1351

• The ITags allow you to have control of 2 momentary channels, 2 channels that can be programmed to be either latching or momentary and 1 proximity based channel. All outputs are negative triggers.
• The installation is very straight forward, for basic system functionality it only requires 7 wires. It does require identifying wires and making connections but is very self-explanatory.
• We recommend changing your batteries once a year, depending on use you can expect to get 1-3 years out of your iTag batteries.
• The PBS-Ii comes with one iTag, to add additional iTags please select how many you would like from the drop down.
• The PBS-ii systems will work with diesel vehicles, In the programming features of the PBS-ii you are able to set a starter delay if you need to give your glow plugs a moment to prime.
• Our iTags use a standard CR2032 battery, these can be found at any dealership, retail or hardware store.
• Your iTags can be programmed to as many push button start systems as you want, giving you the ability to only carry 1 iTag with you and hop into which ever vehicle you feel like driving that day.
• The PBS-ii has a programmable feature that will allow you to set up a starter delay to give your fuel pump to prime.
• Each system comes with an owners card that has a 4 digital pin code, on the back of the owners card there are instructions on how to enter the emergency bypass mode, once you are in emergency bypass mode you just enter your 4 digital pin code and the system will allow you to start the vehicle up.
• You can use any momentary 12V button, we can also modify buttons to work with our system, just give us a call at 877-246-5395 and we can assist you with making sure your vehicle has the look you are wanting it to have.
• The iTags use non-volatile memory, meaning that they will never lose their programming if power to either the key fob itself or the module is lost.
• Our unit is a stand-alone piece and will definitely work with your Dakota digital.
• Our system has built in filtering for MSD ignitions, our system will definitely work vehicles equipped with MSD ignition systems.
• Specs:
• Module Size 5.5” X 3” X 1.25”
• Weight 12 oz
• Operating Voltage 12 Volt
• Current Handling 4 x 60A
• Current Max 300A in-rush
• Accessory Circuits