|
|
|
|
RFID Push Button Start System for Vehicles w/o Power Door Locks, PBS-I
Get the latest technology for your classic Chevelle or Nova with this new push button start system.
The
Digital Guard Dawg PBS-I is a professional grade RFID push button start
system lets you start your vehicle with just the touch of a button!
Using advanced RFID technology (Radio Frequency Identification) just
like that found on world’s finest luxury vehicles, the PBS-I completely
eliminates your vehicles ignition key switch and provides proximity
controlled automatic operation of your entire Ignition. Simply carry one
of the systems digital RFID “iTags” with you. As you come into
proximity of your vehicle, the PBS-I verifies your identity, authorizes
your ignition and with just the “Push of a Button” your engine roars to
life! When you arrive at your destination, another push turns your
engine off and you just walk away. The PBS-I is designed for vehicles
where NO need for extra output channels for power locks, windows or
truck release are required. The PBS-I fully emulates all the functions
of a traditional keyed ignition switch, allowing the user to select
either ACC only / ACC + IGN /or START modes all from a single button.
The PBS-I easily installs on any Classics and Hotrods. Heavy duty power
connectors with 12 GA bus insulated wiring correctly matches existing
high current ignition switch wiring found on many classic vehicles.
Additionally, the PBS-I boasts onboard 60A high current relays on a 4oz
copper chassis, eliminating all unsightly and failure prone external
relay wiring. No one else in the world builds anything even close!
Must Choose Start Button Color and Button Size (22mm or 25mm Hole Size)
Employing
the latest technologies and innovations, we design and manufacture
keyless ignition systems for cars. Not only do our systems protect, but
they provide the ultimate in customer convenience and excitement!
PBS-I Push Button Start System Installation Instructions (PDF)
Part Number: ENC-1350
Check this video out for more information!
- Installation is relatively easy and requires only reconnecting the existing Ignition Switch wires to the PBS module.
The system can learn up an unlimited number Dawg Tags. You can also program a single Dawg Tag into multiple systems so that you can operate an UNLIMITED number of vehicles carrying just one Dawg Tag. Just walk up to any car you own, hope in and go! The PBS-I “Push Button Start” system does not control your door locks. It exclusively operates the function of your ignition. The PBS II “Push Button Start” system will control your door locks as well as up to three additional accessories such as Trunk release, window roll up, etc. Each Digital Guard Dawg System comes with (1) Dawg Tag included. You can purchase extra Dawg Tags and program up to (4) per system. Extra Dawg Tags are $69.00 and can be added any time. Both the PBS I and PBS II systems comes with a “Owner Card” that has a unique 4 digit PIN number on it and a “Programming Switch” that plugs into the control module. If you were to completely lose your Dawg Tag you could use the programming switch to enter your PIN number into the system and start your vehicle. Each Tag has its own unique digital code, (one in over 6 billion codes) just like the different serial numbers on a dollar bill. The systems “learn” the tags serial number. The PBS can be adapted to work with any momentary switch. The PBS I system will work fine with any other alarm system, but it works independently and does not control the other system. The PBS II can control other systems simply by using one of the additional output channels as a control channel. No, all our systems have a non-volatile memory and will not lose code when disconnected from power. There are several ways of wiring the system into your vehicle, if you leave your current Ignition switch connected, you can always start your vehicle in the traditional way using your key. Specs: Module Size 5.5” X 3” X 1.25” Weight 12 oz Operating Voltage 12 Volt Current Handling 4 x 60A Current Max 300A in-rush Accessory Circuits None
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Onboard 60A relays eliminate unsightly and failure prone external relay wiring
- Dual Mode RFID Transmitters provide both Manual & Automatic operation
- Emergency Bypass Card assures starting even if you lose your RFID Transmitter.
- Internal MSD filtering circuitry
- Proudly made in the USA
|
|
|
|
|
|
Other Great Parts That You Might Need |
|
|
|