 |
 |
 |
|
Holley EFI Pro Dash Touch Screen Digital Dashboard Featuring a High Resolution 6.86" Screen
Holley's new 6.86" Pro Dash delivers over 200 monitoring channels of reliable real-time data in a more compact, full HD package suitable for nearly any motorsports application. Be assured that the Holley EFI 6.86" Pro Dash will deliver the vitals you need!
The
6.86" Pro Dash is completely customizable for use in a variety of
motorsports applications. It features a 6.86" 1280x480 resolution low
glare, high brightness, high contrast, full color capacitive touch
screen for easy viewing even in sun, plug and play connection to all
Holley EFI systems as well as a weather resistant aluminum housing
featuring flexible mounting options. Monitor the power of your Holley
EFI system at a glance! Holley EFI 6.86" Pro Dash includes everything
needed for installation!
Built-in GPS with odometer function (Antenna included)
The
Holley EFI 6.86" Pro Dash also features a plethora of Input and Outputs
for expanded functionality of your Holley EFI installation. The
included 34pin connector has 13 multi-configurable inputs for most
Holley EFI sensors, such as pressure and temperature. Not using Holley
EFI sensors? We still have you covered, these inputs are configurable,
allowing you to utilize different sensor scaling calibrations! The Pro
Dash also features two dedicated speed inputs, for RPM, Driveshaft
speed, or any other Hall effect speed input. Need more outputs? The Pro
Dash contains 4 ground switched outputs, that can be utilized with the
switch panel feature to quickly turn on any of your auxiliary
accessories, such as a master nitrous switch, or an electric water pump.
We
have also integrated a 10-LED Programmable shiftlight into the bezel of
the dash, and added 4 optional LED's that can be programmed for
virtually anything, such as fuel pressure or oil pressure warning
indicators, or a target boost indicator, the options are almost endless.
NOTE: This
device will only display and/or communicate with Holley EFI
HP/Dominator ECUs with V4 build 110 or later firmware. It will also
communicate with Terminator X / Terminator X Max and Sniper ECUs. Optional Dash I/O does not communicate to the ECU and are only viewable through the dash display, or dash datalogger.
PART NUMBER: 553-112
Check this video out for more information!
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Plug-and-play Display support for Dominator, HP, Terminator X & Sniper EFI
- Integrated a 10-LED Programmable shiftlight w/ 4-LED warning indicators for other sensor inputs.
- Capable of monitoring up to 238 real-time values such as RPM/TPS/Boost
- 10 default background skins pre-loaded with unlimited options for importing custom layouts
- Quickly swipe between multiple active screens (tune, warm-up, race, drive, etc.)
- Virtual switch panel eliminates the need for external toggle switches
- Manual or auto-brightness features for easy viewing day or night
- Built-in GPS with odometer function (Antenna included)
- On-screen datalog playback features allows you to review vital run information
- Expandable storage via USB
- No stylus required, capacitive touch, just like your smart phone.
- User definable channel alarms and warnings
- 4x 10-32 mounting holes for surface or flush mounting, with high quality hardware included!
- Includes everything needed for installation!
- USB Keyboard and Mouse functionality makes it quick and easy to setup new layouts
- Includes 34 Pin Wiring Harness contains Power, Ground and CANbus connections
- Input and output functionality for 13 multi-configurable inputs, and 4 ground switched outputs.
- User defined alarms for any input
- Upgradable with future software enhancements
- Viewing area is 6.86" on the diagonal
- Dash weight - 1.2 Lbs
- Real-time ECU tuning - HP/Dominator ECUs only
|
|
|
|
|
|
|
