1964 - 1972 Chevelle 4 Wheel Manual Disc Brake Conversion Kit, Non-Power

Home > Chevelle Parts >

Price: $1,079.20

PART NUMBER: BRC-4111

Qty:

Description

Technical Specs

1964 - 1972 Chevelle 4 Wheel Manual Disc Brake Conversion Kit, Non-Power

This is a complete front and rear Four Wheel Disc Brake Conversion Kit with Cast Finish Calipers and Stock Rotors.

Stock Height spindles
Front Stock Plain Face 11" rotors 5"x4.75" w/ 7/16" studs
Dust caps
Inner & outer bearings, seals, & mounting hardware
Front caliper brackets
Backing Plates
Front rubber brake hoses
Large GM single piston calipers pre-loaded with pads

Must use 15" or larger rims.

Complete Rear Disc Brake Conversion Kit Includes:
Rear 11" Plain Face GM Rotors Multi Pattern
Fits 5x4.75" w/ 7/16 Studs & 5x4.5" w/ 1/2 Studs
Large GM Large Bore Single Piston Calipers w/ Self Adjusting E-Brake (1979 Cadillac El Dorado)
D54 Pads Included
Caliper Brackets & Spacers
Bracket Hardware
Rubber Brake Hoses Hoses & Clips
Emergency Brake Cables

This kit does NOT come with a Master Cylinder or a Proportioning Valve. It is designed to be used with several of our Master Cylinders or Disc/Disc Upper Firewall Booster Kits.

Maximum diameter of 6.11" to fit rotor hat. .050x45 Degree Chamfer 2.786" max register axle. Does not Fit 14" Rims Must use 15" or larger.

When installing rear disc brake kit a disc/disc proportioning valve with a 1-1/8" bore master cylinder is recommended, not included. This kit can be used with several of our Disc/Disc upper booster kits for a custom set-up.

**DOES NOT INCLUDE BRAKE LINES** WILL ONLY WORK WITH 15 INCH OR LARGER WHEELS

PART NUMBER: BRC-4111